ERROR CODES

DIAGNOSTICS FOR RT300/RT310  ROTARY TEMPERATURE TRANSMITTER SYSTEMS 

POWER STATUS

Stationary and rotary power in spec

CORRECTIVE ACTION:
No action required.

Rotary power out
of spec

CORRECTIVE ACTION:
Check rotor/stator spacing coax connections.

Stationary power out of spec

CORRECTIVE ACTION:
Check power source

System not powered

CORRECTIVE ACTION:
Check power source, power connections.

Insufficient rotary power or data not received

(Rotor Reset Mode)

CORRECTIVE ACTION:
Check rotor/stator spacing, coax connections.

DATA STATUS

Digital Transmission is error-free

CORRECTIVE ACTION:
No action required.

Data not received

CORRECTIVE ACTION:
Check rotor/stator spacing coax connections.

RTD STATUS

No errors detected

CORRECTIVE ACTION:
No action required.

Rotary side error:
RTD Channel 1 out of range (including open or shorted)>

CORRECTIVE ACTION:
Check RTD, connections

Open circuit in 4-20mA loop on Channel 1

CORRECTIVE ACTION:

Check connections and continuity of current loop