TTSI
TORQUETRAK SENSOR INTERFACE
The Binsfeld Engineering TorqueTrak Sensor Interface (TTSI) is a companion subsystem to other products providing a simple intuitive user interface along with additional analog and digital I/O. Off-the-shelf components with custom programming allow for flexible and economical solutions.
- Adaptable to existing customer equipment
- Simple, intuitive operator interface
- Customizable software
- Compatible with any Modbus sensor
- Variety of mounting options
DOCUMENTATION
DESCRIPTION
As the name describes, the TTSI is the interface between the sensor and the customer equipment. On the customer side, the TTSI can provide operator displays, analog I/O, digital communications, and/or discrete digital I/O that are compatible with customer equipment. The TTSI can be provided in a self-contained enclosure, or as DIN rail mountable components that can be added to existing control cabinets. The purpose of the TTSI is to provide a low-cost interface between the sensor and the customer equipment.
The main components of the TTSI are a PLC and Operator Display.
SYSTEM SPECIFICATIONS
INPUT VOLTAGE:
85 to 240VAC
INPUT POWER:
3amp D-curve 2 pole 240VAC circuit breaker.
ANALOG OUTPUTS (AS AVAILABLE):
Current sourcing analog output load impedance must be 200 to 800Ω. Full scale calibration error ±2% max; accuracy vs. temperature ±100ppm/°C; output range 4-20mA sourcing; 12-bit resolution
Voltage output into > 4KΩ load. Full scale calibration error ±2% max; accuracy vs. temperature ±100ppm/°C; output range 0 to 10VDC; 12-bit resolution
Operating temperature: 0 to 40°C ambient.
IP rating: IP67
Modbus communications spec: 115.2Kbaud, 8 data, no parity, 1 stop. Modbus slave address 31.