The DS221 is a digital upgrade option for Rieter/SwissTex frequency-based rotary temperature transmitter systems. The device mounts in place of the original stator circuit board and accepts the Rieter frequency signal directly from the rotating transmitter. The DS221 is capable of one of two different outputs. When connected to + and – FREQUENCY, the DS221 generates the original Rieter frequency signal for use with a standard Rieter heater control system. When connected to + and – CURRENT, the DS221 generates a linear 4-20 mA current signal suitable for off-the-shelf process controllers.
- Rugged – Fully encapsulated rotating electronics
- Reliable – Digital circuitry is immune to electrical noise and drift
- Rieter and SwissTex Compatible – Frequency output; fits J7-30, J7-31 and J7-32 roll motors
- Optional 4 – 20 mA output for standard controls
- Product Support – Strongest customer support in the industry
FEATURES & BENEFITS
Reliable – Digital circuitry is immune to electrical noise and drift
Rieter Compatible – 4-20 mA or Frequency output; fits J7-30, J7-31 and J7-32 roll motors
Product Support – Strongest customer support in the industry
DS221 - SPECIFICATIONS
CURRENT OUTPUT (+/- CURRENT)
Current Loop Power Input: 12 VDC to 30 VDC, 25 mA maximum
Current Draw: 4 mA for 21,731 Hz input (0° C RTD temperature)
20 mA for 14,935 Hz input (300° C RTD temperature)
20.1 mA for fault condition (out of range or no signal)
Maximum Current Draw Error: ±0.167% of full scale (±0.5° C for 300° C range) for 14,935 Hz to 21,731 Hz input frequency, over specified power supply and operating temperature range
RIETER FREQUENCY OUTPUT (+/- FREQUENCY)
Output Signal: Open collector output: 30 V max, 120 mA max
Frequency Form: Rectangular pulses
Frequency Range: 14,935 Hz to 21,731 Hz
Measurement Resolution: 0.015°C
Operating Environment: Temperature: 0 – 85° C (non-condensing)
Input Signal: Pulsed infrared LED @ 935nm
HD480-1 HEATER DRIVER
upgrade/conversion option for godet heater driver on Rieter extrusion machines. Mounts in place of original heater (replaces Rieter “orange box”).
A true drop-in replacement rotating assembly for Rieter/SwissTex rotating transmitter. This rotor fits on J7-30, J7-31, and J7-32 roll motors.
BINSFELD ENGINEERING INC.
Binsfeld's Torque Measurement Systems measure true mechanical torque and power on rotating shafts. We also offer consultation, strain gaging and installation services.
Binsfeld's Rotary Temperature Transmitter Systems provide accurate and reliable temperature control on heated godets and calendars. We also offer design and OEM services.
Sign-up to receive featured application stories, relevant news, tips, and new product release information for our torque measurement products.