TORQUETRAK CALCULATORS

Full Scale Torque
corresponds to 10V output from the RX10K receiver


mm
mm (enter 0 for solid shaft)
(supplied with gages)
(4 for full bridge)
volts
volts
N/mm2 (206800 for steel)
(0.3 for steel)
Scale TorqueTrak 10K Output
Optional


N·m (0.25 to 4.0 times Full Scale Torque; with no scaling, Tref = Tfs)
Set System Gain on RX10K receiver to this value
Verify the Output
Recommended


NOTE: Valid for 350 ohm strain gage only. Deviation in the actual Voltage Output or Displayed Value from the Calculated Output value with shunt applied is not an indication of overall system accuracy. Shunt is placed in parallel with one leg of the bridge, exaggerating error that is cancelled in the full bridge circuit. However, Voltage Output should be within +/-1% of the calculated value.
Torque & Power Conversions
kW
RPM
N-m
RPM

BINSFELD ENGINEERING INC.

4571 W. MacFarlane Rd.
Maple City, MI 49664 USA

&nbsp&nbsp231.334.4383
&nbsp&nbspContact Us
Z&nbsp&nbspISO 9001:2015 Certified

TORQUETRAK

Binsfeld’s Torque Measurement Systems measure true mechanical torque and power on rotating shafts. We also offer consultation, strain gaging and installation services.

ABOUT TORQUETRAK

TEMPTRAK

Binsfeld’s Rotary Temperature Transmitter Systems provide accurate and reliable temperature control on heated godets and calendars. We also offer design and OEM services.

ABOUT TEMPTRAK

TORQUETALK NEWSLETTER

Sign-up to receive featured application stories, relevant news, tips, and new product release information for our torque measurement products.