HD480-I
The HD480-I Heater Driver is an upgrade/conversion option for the godet heater driver on Rieter extrusion machinery. The unit mounts in place of the original heater driver but accepts a standard 4-20 mA signal (instead of the 14,935 – 21,731 Hz Rieter frequency signal) for 0 – 300° C sensed temperature. When used in conjunction with the Binsfeld DS220 Digital Stator, the HD480-I allows users to convert machine control from the unique Rieter frequency to industry standard 4-20 mA.
FEATURES & BENEFITS
Soft-Start – at the beginning of every PWM period to extend heater life
User Selectable Ramp Time – soft-start ramp time from 0 to 18 AC half-cycles
User Selectable PWM – PWM period from 1.0 to 2.8 seconds
No External DC Power Required– powered from 4 – 20 mA input
Product Support – Strongest customer support in the industry
HD480-I - SPECIFICATIONS
HD480-I ASSEMBLY
Operating Voltage: 80-530 VAC (47-63 Hz)
Max Load Current: 63 Arms
Min Load Current: 150 mArms
Input: 4-20 mA at minimum 14 V compliance (4-20 mA source must be able to drive 14 V min)
PWM Period: Adjustable 1 to 2.8 seconds
PWM Duty Cycle: On-Time is proportional to 4-20 mA input (i.e. 0% at 4 mA, 100% at 20 mA) Operating Temperature: -30 to 50° C
SOLID STATE RELAY MODULE
Crydom Part Number: D4875-10
NOTES
Torque Heater and AC Line field connections to 15 in-lb.
In order to maximize convection cooling, mount the heat sink fins in a vertical direction with a minimum of 1-inch clearance above and below the HD-480-I device.
RECOMMENDED
RT220R SERIES
A true drop-in replacement rotating assembly for Rieter/SwissTex rotating transmitter. This rotor fits on J7-30, J7-31, and J7-32 roll motors.
DS221 STATOR BOARD
An upgrade that mounts in place of the original Rieter/SwissTex stator circuit board. The DS221 is capable of 4-20 mA or standard output.